39
Document # 50075 Rev B 3/13/95
❑00 ❑01 ❑02 ❑03 ❑04 ❑05 ❑06 ❑07 ❑08 ❑09 ❑10 ❑11 ❑12 ❑13 ❑14 ❑15
Addresses 00 to 15 store the Primary Phone Number. Enter 'F' to represent the end of the number.
❑16 Primary Comm Format:0 = ADT FSK II.
❑17 ❑18 ❑19 Primary Account Code.
❑20 ❑21 ❑22 ❑23 Primary 24-Hour Test Time.

0000 = 12:00 midnight.

❑24 Primary Number Test Time Interval. '0' for 24-hour.
❑25 ❑26 ❑27 ❑28 ❑29 ❑30 ❑31 ❑32 ❑33 ❑34 ❑35 ❑36 ❑37 ❑38 ❑39 ❑40
Addresses 26-41 store the Secondary Phone Number.

Enter 'F' to represent the end of the number.

❑41 Secondary Comm Format: 0 = ADT FSK II.
❑42 ❑43 ❑44 Secondary Account Code.
❑45 ❑46 ❑47 ❑48 Secondary 24-Hour Test Time.

0000 = 12:00 midnight.

❑49 Secondary Number Test Time Interval. '0' for 24-hour.
❑50 ❑51 Start Monitoring Address
❑52 ❑53 End Monitoring Address
❑54 UNI•COM Communication Selection. '0' for UNI•COM Communication disabled.
❑55 Backup Reporting. '1' reports to either Primary or Secondary Central Station.
❑56 Touchtone/Rotary Select. '0' for Touchtone.
❑57 Make/Break Ratio. '0' for 67/33 make/break ratio.
❑58 Leave default of zero.
❑59 Leave default of zero.
❑60 AC Loss reporting delay. '1' for 6 hour time delay.
❑61 Host PANEL ID. '0' for Unimode 200.
❑62 ❑63 ❑64 ❑65 Serviceman Code. Factory default setting.
❑66 ❑67 ❑68 Leave default of '000'.

Programming Reference Sheet Factory Default Settings

--- To enter Programming, press Mode: 7 7 6 4, Enter
FF
0
0
FFF
0
0
0
0
0
0
1
0
0
0
0
F
F
0
01
1
6
0
13
0
0
00
00
0
0
0
0
0
0
0
2
0
1
F
F
F
FFF
F
F
FF
FF
F
FFFFFF
F
FFF
FF