36 Document # 50075 Rev B 3/13/95
❑00 ❑01 ❑02 ❑03 ❑04 ❑05 ❑06 ❑07 ❑08 ❑09 ❑10 ❑11 ❑12 ❑13 ❑14 ❑15
Addresses 00 to 15 store the Primary Phone Number. Enter 'F' to represent the end of the number.
❑16 Primary Comm Format: 0 = ADT FSK II.
❑17 ❑18 ❑19 Primary Account Code: Valid keys are 0-9.
❑20 ❑21 ❑22 ❑23 Primary 24-Hour Test Time.
Enter military time (i.e. 1400 for 2 PM).
❑24 Primary Number Test Time Interval. Enter '0' for 24-hour; '1' - 12-hour.
❑25 ❑26 ❑27 ❑28 ❑29 ❑30 ❑31 ❑32 ❑33 ❑34 ❑35 ❑36 ❑37 ❑38 ❑39 ❑40
Addresses 25-40 store the Secondary Phone Number.
Enter 'F' to represent the end of the number.
❑41 Secondary Comm Format: 0 = ADT FSK II.
❑42 ❑43 ❑44 Secondary Account Code: Valid keys are 0-9.
❑45 ❑46 ❑47 ❑58 Secondary 24-Hour Test Time.
Enter military time (i.e. 1400 for 2 PM)
.
❑49 Secondary Number Test Time Interval. Enter '0' for 24-hour; '1' - 12-hour.
❑50 ❑51 Start Monitoring Address.
❑52 ❑53 End Monitoring Address.
❑54 UNI•COM Communication Selection. Enter '0' to disable UNI•COM communication; '1' for zone report-
ing receive only communication; '2' for zone reporting receive/transmit communication; '3' for point
reporting receive only communication; '4' for point reporting receive/transmit communication.
❑55 Backup Reporting. Enter '0' to have secondary phone number act as backup only; '1' to have either
primary or secondary phone number receive reports; '2' to disable reports to the secondary phone
number.
❑56 Touchtone/Rotary Select. Enter '0' for touchtone dialing; '1' for rotary dialing.
❑57 Make/Break Ratio. If rotary dialing is selected in Address 58; Enter '0' for a 67/73 make/break ratio; '1'
for a 62/38 make/break ratio.
❑58 Leave default of 0.
❑59 Leave default of 0.
❑60 AC Loss Reporting Delay. Enter '0' for no time delay after AC loss; '1' for 6 hour delay; '2' for 7 hour
delay; '3' for 8 hour delay; '4' for 9 hour delay; '5' for 10 hour delay; '6' for 11 hour delay; '7' for 15 hour
delay; '8' for 16 hour delay; '9' for 17 hour delay; 'A' for 18 hour delay; 'B' for 19 hour delay; 'C' for 20
hour delay; 'D' for 21 hour delay; 'E' for 22 hour delay; or 'F' for 23 hour delay.
❑61 Host Panel ID. Enter '0' for Unimode 200; '1' for Unimode 416 or '2' for Unimode II; all other entries are
invalid.
❑62 ❑63 ❑64 ❑65 Serviceman Code. Valid entries are 0-9.
❑66 ❑67 ❑68 Leave default of '000'.
--- To enter Programming, press Mode: 7 7 6 4, Enter
6.0 Programming Reference Sheets