Turning the System Off
Turning the System Off When No Alarms Are in Progress
CODE
1.Enter through a designated entry door. The keypad sounds a tone to remind you to turn the system off. The ON light blinks.
2.Turn the system off by entering your keypad code.
To prevent an alarm, you must enter your code before the entry delay ends. See page 12 to reference the Entry Delay Time programmed in your system.
Once the system is off, the ON light goes out.
Turning the System Off and Canceling an Alarm
Should you cause an alarm accidentally:
CODE
1.Enter through a designated entry door. The siren sounds, and the ON light blinks. The Premium keypad’s message window reads ALARM. The Standard keypad’s ON light blinks.
2.Enter your keypad code. The Premium keypad’s message window reads ALARM MEMORY.
3.Press the CANCEL key (you must press the CANCEL key within 20 seconds of entering your code). The keypad beeps.
You will not receive a call from ADT. The Premium keypad’s message window reads ALARM CANCELED.
Note: If you press the CANCEL key before entering your code, the result is the same.
18
