Testing With Not Ready Zones | ADT Security Services BHS-4000A

Testing With Not Ready Zones

If the system is not ready to test, the message window reads NOT READY, or the READY light is off. Do the following:

Standard Keypad

1.Press the OPTIONS key.

2.Press the 7 key.

READY

3.Observe which zone number is displayed. This is the zone that is not ready.

4.Refer to the Pop-Up Zone Card to verify the location of the zone.

5.If the zone is a door or window, make sure that it is securely closed.

6. If the READY light turns on, conduct the test.

7. If the READY light does not turn on, call Customer Care at 800.445.0872 for assistance.

Premium Keypad

1.Observe which zone number is displayed. This is the zone that is not ready.

2.Refer to the Pop-Up Zone Card to verify the location of the zone.

3.If the zone is a door or window, make sure that it is securely closed.

4.If the message window now reads READY, conduct the test.

5. If the message window still reads NOT READY, call Customer Care at 800.445.0872 for assistance.

29

Image 35

ADT Security Services BHS-4000A user manual Testing With Not Ready Zones

Contents

BHS-4000A System User’s Manual FCC Notice Consumer Information Industry Canada Table of Contents System Options System Testing Warranty Information Important Notices Questions and Answers If you have any questions about ADT Security System, visit Welcome How to Avoid False Alarms Standard Equipment ADT Home Security System Standard Equipment, cont’d Heat Sensor Optional Equipment Optional Equipment, cont’d Optional Features Standard Keypad PartsKeypad Parts of the Keypad Premium Keypad Message Window Premium Keypad Status Display Standard Keypad Call 911 First Emergency Keys Using the Keypad Designated Doors Entry DelayExit Delay Four On Modes Turning the System On Turning the System On in Motion Off Mode Turning the System On in Normal Mode Turning the System On in Instant Mode Turning the System On in Motion Off/Instant Mode Standard Keypad Turning the System On When It Is Not Ready Bypass Turning the System Off Turning the System Off When No Alarms Are in ProgressTurning the System Off and Canceling an Alarm What to Do in an Actual Emergency Turning the System Off Without Canceling an Alarm Turning the System Off after an Alarm Occurs in Your Absence Bypass a Zone System Options Turn the Door Chime On or Off View Alarm Memory Standard Keypad Premium Keypad Create an Additional Keypad Code Keypad Code User Number Delete a Keypad Code Siren and Transmission Test System Testing Testing All Burglary Sensors Testing the Doors and Windows Only Testing the Smoke Detector Door Chime Ready Testing With Not Ready Zones Using GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Radio Problem Indication Optional Feature Communication Problem Indication Line Cut Indication Optional Feature Zone Trouble Indication Smart·Key Wireless Remote Low Battery Optional FeatureUpload/Download Failure Keypad Not Working Speaker Clicks Component Failure IndicationCall ADT Indication Siren Failure Indication If You Trigger an Alarm While Cleaning the Detector Cleaning the Smoke Detector Emergency Evacuation Plans Setting the ClockService the Detector Every Two Years Page General Use of the System Questions and Answers Security Passwords and Keypad Codes Emergency Contacts Alarms and Emergencies Financial Questions Additional Questions Warranty InformationRepairs and Upgrades UL Information DSL ServiceVoIP Service Alarm Permits Important NoticesPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care