5.1.4 Connection Testing

With the previous settings, follow the instructions below to ensure whether you have established the connection successfully.

1. Click Start Command Programs

4. If you receive a response as in the sample screen below, you have successfully made the connection.

2. Type in ping 192.168.1.1 then Enter. (See the sample screen below)

**This IP is the DVR IP address which is assigned for the connected DVR.

3. If you receive a response as in the sample screen below, the connection hasn’t been successfully established. Please re-check all the hardware and software installations by repeating steps 1 to 5. If you still can’t establish the connection after rechecking, please contact your dealer.

45

Page 47
Image 47
Maxtor AVE MVDR-5000 operation manual Connection Testing, Click Start Command Programs