2.3System Information and Channel Selection
2.3.1System information
You can display system settings information as shown in FIGURE 3.3 A below at any time by pressing the Display button 8 . In the playback mode, the recorded video information is displayed. In the live or recording mode, the Manual Recording information is displayed. Each sequential press of the Display button 
displays a different message detailed in the following example. By default, the unit displays time, date, and an indicating bar of capacity status on a monitor as shown.
Default Display
CH1 | CH2 |
CH3 | CH4 |
01/01/2005 12:00:00
CH1, CH2, CH3, CH4 are titles for the corresponding channels, changeable in the setup menu.
Capacity Status:
(Capacity Used) (Capacity Remaining)
01- 01-2005 12:00:00
(Date) (Time)
Press the Display button 8 once; the DVR will display the following sample message plus the default display. Press the Display button
8again; the unit will not display any OSD message. Press the button one more time to go back to the default display.
FIGURE 3.3 A |
|
|
|
|
|
| ||
| 1+2 :59G | 12.4 HR |
|
|
|
| ||
|
|
| ||||||
|
|
| ||||||
|
| |||||||
| QUALITY : | NTSC | ||||||
| RATE : |
| 20 F/S | |||||
|
| HD SIZE | REC | |||||
|
| 1 | 20G | 10.0% | ||||
2 | 39G | 0.0% | ||||||
IP :
10 / 01 / 2004 15:10:30
(1+2: 59G): Total capacity of installed hard disk, 59 GB.
(12.4 HR): Total 12.4 hour recording time available.
( |
| ): Timer record activated. |
| ||
( |
| ): Alarm record activated. |
(QUALITY: BEST): Record quality setting, BEST.
(NTSC ): NTSC system.
(RATE: 6 HR): Setting of Record time mode, 6 hours.
(20 F/S): Record speed setting, 20 fields/sec.
( |
|
|
|
|
|
|
| ): Audio function activated. |
|
|
|
|
|
|
| ||
|
|
|
| |||||
( |
|
|
|
|
|
|
| ): Indicates which HDD is activated. |
|
|
|
|
|
|
| ||
( | 9K ): The image file size. | |||||||
( | HD ): Hard disk compartment. | |||||||
( SIZE 20G): The capacity of the installed hard disk.
( REC ): Percentage of system recording.
( PLAY ): Percentage of system playback.
( IP : 192 . 168 . 1 . 90 ): Network IP Address
192.168.1.90
( 
): External signal.
( 
x ): Cannot operate now.
2.3.2 Channel Selection
CH1, CH2, CH3, CH4, Quad( 
), and the Seq./Save button are used to select the video channel and zoom in factor. The following table shows the functions in a different mode.
12
