MOTION SETTING:
The motion detection function is convenient for people without an alarm trigger input, but the function can be used with an alarm trigger input at the same time. If this function is enabled, the object movement will trigger the alarm recording just like the outside trigger signal. Before using the motion detection function, please turn the CH1/ CH2/ CH3/ CH4 options at ON, and set SENTIVITY (1 ~ 5) to a suitable value.
MOTION SETTING
CH1 | : ON |
CH2 | : OFF |
CH3 | : OFF |
CH4 | : OFF |
SENSITIVITY | : 3 |
MAIN PAGE
CH1/ CH2/ CH3/ CH4 :
These options enable/disable the motion detection.
ON: Enables the motion detection.
OFF: Disables the motion detection.
SENSITIVITY(1 ~ 5):
This option allows users to set the motion sensitivity. 1 is the most sensitive setting. 5 is the least sensitive setting.
4.3 TIMER / SEQ / TITLE Setting
MAIN MENU
RECORD
ALARM / MOTION
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
GOTO CLOCK/ TIMER PAGE
The DVR provides a weekly table consisting of
two periods of time each day for scheduled recording. This option allows you to set the time each day when the DVR will start and stop recording.
MAIN MENU
RECORD
ALARM / MOTION
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
GOTO CLOCK/ TIMER PAGE
TIMER/ SEQ/ TITLE
CLOCK | : SET | ||
DAYLIGHT SAVING | : OFF | ||
REC ENABLE | : ON | ||
TIMER | : SET | ||
SEQUENCER | : SET | ||
TITLE | : SET | ||
|
| MAIN PAGE |
|
|
|
| |
CLOCK:
This entry allows users to set the system time.
NOTE: Clock data is retained for about 3 months after the
DAYLIGHT SAVING:
This entry allows users to set the daylight saving time.
OFF: Disables the daylight saving time.
USA: Daylight saving time begins at 2:00 a.m. on the first Sunday of April. Time reverts to standard time at 2:00 a.m. on the last Sunday in October.
EUROPE (Excepting the UK): Daylight saving time begins at 2:00 a.m. on the last Sunday of March. Time reverts to standard time at 2:00 a.m. on the last Sunday in October.
UK: Daylight saving time begins at 1:00 a.m.
33
