Controls & Indicators
IMPORTANT NOTICE
A security system cannot prevent emergencies. It is only intended to alert you and – if included – your central station of an emergency situation. Security systems are generally very reliable but they may not work under all conditions and they are not a substitute for prudent security practices or life and property insurance. Your security system should be installed and serviced by qualified security profes- sionals who should instruct you on the level of protection that has been provided and on system operations.
Language Selection
Your system can display messages in different languages.
1.Press and hold both 
keys simultaneously.
2.Using the 
keys, scroll through the available languages.
3.Press 
to select your desired language.
Arming & Disarming the System
Stay Arming
Stay arming will bypass the interior protection (i.e. motion sensors) and arm the perimeter of the sys- tem (i.e. doors and windows). Close all sensors (i.e. stop motion and close doors). The Ready ( 
) indicator should be on.
Press and hold the Stay key for 2 seconds and/or enter your Access Code and do not leave the pre- mises. During the setting state (exit delay active), the Armed ( 
) and Ready ( 
) indicators will light.
When the exit delay is completed, the alarm system is armed/set and this is indicated on the keypad as follows: the Ready ( 
) indicator will turn off, the Armed ( 
) indicator will remain on.
The Armed ( 
) indicator and a bypass message will be displayed. The system will automatically bypass certain interior sensors (i.e. motion sensors).
NOTE: For SIA FAR listed panels, the Stay Arming Exit Delay will be twice as long as the Away Arming Exit Delay.
NOTE: If your system is installed in accordance with SIA
2
