bypassed when arming your system. Zones cannot be bypassed once the system is armed. Bypassed zones are automatically cancelled each time the system is disarmed and must be bypassed again, if required, before the next arming.
Bypassing Zones
With the system disarmed.
1. Press | to enter the function menu. The keypad will display “Press for < > Zone Bypass”. |
2.Press 
or 
, then your [access code] (if required). The keypad will display “Scroll to < > Bypass Zones”.
3.Enter the
You can also use the 
keys to find the zone to be bypassed, and then press 
to select the zone. The keypad will display “Zone Name”. “B” will appear on the display to show that the zone is bypassed. If a zone is open (e.g., door with door contact is open), the keypad will display “Zone Name” O”. If you bypass the open zone, a “B” will replace the “O”.
4.To unbypass a zone, enter the
also use the 
keys to find the zone, and then press 
to select the zone. The “B” will disappear from the display to show that the zone is no longer bypassed.
5.To exit bypassing mode and return to the Ready state, press 
.
Activating All Bypassed Zones
To remove bypass (all zones):
1.Press 
, then your [access code] (if necessary).
2.Press 
.
3.To exit bypassing mode and return to the Ready state, press 
.
Recalling Bypassed Zones
To recall the last set of bypassed zones:
1.Press 
, then your [access code] (if necessary).
2.Press 
.
3.To exit bypassing mode and return to the Ready state, press 
.
Bypass Group
A Bypass Group is a selection of zones programmed into the system. If you bypass a group of zones on a regular basis, you can program them into the Bypass Group, so that you do not have to bypass each zone individually every time. Only one Bypass Group can be programmed.
NOTE: If a group has already been bypassed before programming a Bypass Group, you will be unable to recall that group after programming the new group.
To program a Bypass Group:
1.Press 
, then your [access code] (if necessary).
2.Enter the
use the 
keys to find the zone to be included in the bypass group, then press 
to select the zone.
3.To save the selected zone into the group, press 
.
4.To exit bypassing mode and return to the Ready state, press 
.
NOTE: If an access code is required to enter bypassing, only the Master Code and codes with Supervisory enabled can set the Bypass Group.
5
