Menu Descriptions
61179621L1-5C 5-75
NOTE
The System Management menu TFTP IP address option must be
configured to use TFTP.
Y-Modem Menu
Y-Modem
Main Menu\System Management\Code Download Method\Y-Modem\
The Y-Modem menu (see Figure 5-50) is used to download code stored from a computer to the
Total Access 1224 through the craft port.
NOTE
To expedite the download time, change the baud rate to 38400 bps
prior to downloading code. For more information, refer to “Current
Baud Rate Menu” on page 5-65.
Figure 5-50. Y-Modem Menu
To download code via the Y-Modem menu, perform the following steps:
1. Access the system with System Administrator privileges using a terminal application that
allows file transfers, such as HyperTerminal.
2. From the Y-Modem menu, select Download Network Module Code, and press ENTER.
The Y-Modem receive utility begins.
3. If using HyperTerminal, select Transfer from the menu, and select Send File.
TID: HSVL00001 Total Access 1224 MM/DD/YY HH:MM
Unacknowledged Alarms: None
WARNING! THIS IS SERVICE AFFECTING!
Y-Modem is the file transfer protocol.
This function cannot be initiated via a telnet
connection (use TFTP instead).
1. Download Network Module Code
2. Exit
Selection :
'?' - System Help Screen