Installation Prerequisites
61179621L1-5C 3-3
INSTALLATION PREREQUISITES
The following items should be completed prior to installing the Total Access 1224:
1. Make sure that the network feed is in place.
2. Make sure that local power is available and that the required fuses are installed.
CAUTION
The maximum power draw for the Total Access 1224 system is 50
watts.
The Total Access 1224 system should be fused at 3.0 amps.
3. Complete Table 3-2 with the information that is needed to turn-up and provision the Total
Access 1224.
Table 3-2. Turn-up and Provisioning Prerequisite information
Item Description Value
Network Feed/Aggregation System IP Address
Network Feed/Aggregation System Port
Total Access 1224 IP Address
Total Access 1224 Default Gateway
Total Access 1224 Subnet Mask
Total Access 1224 VPI/VCI
Number of Network Facilities Feeding the Total Access 1224
CLEI Code/System Name