ADTRAN 4106 Plan A, 4206 Plan A system manual Navigating the Terminal Menu, Terminal Menu Window

Section 5 User Interface Guide TRACER 4106/4206 System Manual

1.NAVIGATING THE TERMINAL MENU

The TRACER 4106/4206 menu system can be accessed with a VT100 compatible terminal that is connected to the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1 stop bit, and no parity. Flow control on the serial interface should be configured to NONE for proper operation. Once a terminal is connected, press <Ctrl + L> to refresh the current screen. If password access has been enabled, the ENTER PASSWORD message displays at the bottom of the TRACER 4106/4206 System Status menu.

All TRACER 4106/4206 systems are shipped factory default with password protection disabled.

Terminal Menu Window

The TRACER 4106/4206 uses a series of menu pages and a single main menu page to access its many features. The main menu page (see Figure 1) provides a link to all available configuration/status pages.

After connecting a VT100 terminal to the TRACER 4106/4206, press <Ctrl + L> to redraw the current screen.

Figure 1. Main Menu Screen

42 © 2004 ADTRAN, Inc. 612804206L2-1A