ADTRAN 619500001-19A Preparing to Install the NetVanta UC Server

Unified Communications Server Preparing to Install the NetVanta UC Server

3. If you disconnected any cables to open the chassis, reconnect all cables firmly.

4. Close the computer chassis.

Preparing to Install the NetVanta UC Server

The following topics are covered in this section:

•Minimum System Requirements on page 10

•Limitations and Restrictions on page10

•Starting the NetVanta UC Server on page11

•Verifying the Internet Connection on page12

•Verifying the Operating System on page12

•Configuring Antivirus Software on page13

•Configuring Services on page 13

•Installing Microsoft MAPI Connector on page14

•Installing CTI Link/Tapi Software on page15

•Installing the Agent for IP Office Centralized Voicemail on page17

To correctly install NetVanta software on the server, you need to log onto the computer as a user with local

administrative rights.

For information about installing the Intel Dialogic cards, please refer to the manufacturer’s

instructions.

For multiple D/82JCT cards a jumper cable is needed (CT Bus cable).

We recommend that you install and configure the server at the customer site.

Additional hardware and software might be required for specific private branch exchange

(PBX) integrations.