Figure 2-6

2.3.4 Power Supply

The CP-150 comes with a PS/2 power supply with full-range auto-sensing Active PFC, and 400W output.

2.3.5 Hooking up external monitor

The external CRT monitor / Projector can be hooked up via the side panel VGA (15pin) port while the system is off. The cable from the CRT/Projector should be inserted into this port. If this cable is connected, the display should come on whenever the machine is turned on. The internal display monitor uses a standard viewing resolution. The default setting results in an image display on both the portable’s LCD and CRT. To change the output mode (from simultaneous LCD/CRT), please refer to your VGA setting.

CP-150 User Manual --- Page 10

Page 19
Image 19
Advantech CP-150 manual