Note! Load Optimized Defaults loads the default system values directly from ROM. If the stored record created by the Setup program should ever become corrupted (and therefore unusable), these defaults will load automatically when you turn PCM-9588 system on.

3.2.11Set Password

Note! To enable this feature, you must first go to the Advanced BIOS Features menu, choose the Security Option, and select either Setup or System, depending on which aspect you want password protected. Setup requires a password only to enter Setup. System requires the password either to enter Setup or to boot the system. A password may be at most 8 characters long.

To Establish Password

1.Choose the Set Password option from the CMOS Setup Utility main menu and press <Enter>.

2.When you see “Enter Password”, enter the desired password and press <Enter>.

3.At the “Confirm Password” prompt, retype the desired password, then press <Enter>.

4.Select Save to CMOS and EXIT, type <Y>, then <Enter>.

Chapter 3 BIOS Operation

33

PCM-9588 User Manual

Page 43
Image 43
Advantech PCM-9588 user manual Set Password, To Establish Password