Description of the appliance
To empty out water:
•press the START/PAUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;
•select the spin speed and then press START/PAUSE;
•select the DRAIN programme 
to empty out the water without spinning.
Warning! The programme selector dial must be turned first to OFF and then to the DRAIN programme.
If the water is not emptied out, the machine automatically empties itself after 18 hours.
The RINSE HOLD option cannot be selected for the automatic WASHING & DRYING programme.
Display
The display shows the following information:
•Duration of the selected programme (in minutes), calculated auto- matically on the basis of the maximum recommended load for each type of fabric.
•Selected drying time (max. 130 minutes for cotton, 100 minutes for synthetics).
After the programme has started, the time remaining is updated every minute.
•When the programme has finished, a steadily lit zero is displayed.
•Delayed start, (19 hours max.) programmed using the special button
. The countdown is updated every hour.
•Alarm code indicating a fault in the machine operation (see page 37).
Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.
After the machine has started, only the running phase pilot light stays on. When the programme
has finished, the END 
pilot light comes on.
PREWASH
MAIN WASH RINSES EXTRA RINSE + SPIN DRYING END
OVERDOSAGE
15
