Something not working?, Troubleshooting | AEG 16810 specification

Something not working?

If during the spin cycle the machine makes an unusual whistling noise, different from the noise made by tradi- tional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below.

If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

-E10: problem with the water supply (phase light is on)

-E20: problem with water draining (phase light is on)

-E40: door open (phase light is on)

Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, con- tact your local AEG Service Force Centre.

Problem		Possible cause	Solution


		The main electrical fuse	Replace the fuse.
		has blown.
		The door is not properly	Close the door; the click
		closed (E40).	of the lock should be heard.
The machine does not work		The plug is not connected.	Insert the plug.
		The START button has not	Press the button.
		been pressed.
		The DELAY START	Check the selected delay on
		option has been selected.	the display.

37

Image 37

AEG 16810 manual Something not working?, Troubleshooting, Problem Possible cause Solution

Contents

Lavamat Turbo Dear customer Contents Page Contents Technical data Service General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connection Proper use Child safety Tips for environmental protection DisposalPackaging materials Machine Main features of your washer-dryer Front view Description of the appliance Programme selector dial Control panel START/PAUSE button Delay Start button Drying Time button Electronic Drying buttonProgramme Option buttons Stain Prewash Soak Programme progress display Display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawer Sorting out and preparing the laundry Preparing the wash cycle Types of fabric and care labels Sort of laundry Approximate Dry weightsCotton Synthetics Delicates 40 Detergents and additives Load Preparing the drying cycleGarments not suitable for drying Sort of laundry Duration of the drying cycle Drying symbols on garment labelsModification of the drying time or degree of drying Fibre residue Additional drying How to dryDrying only Rated load Load the laundry How to washAdd detergent and additive Selection of the spin speed or Rinse Hold option Selection of the desired options Before starting Selection of the Extra Rinse option At the end of the programme Starting the programme NON-STOP programme Automatic washing and drying Wash programmes Programme chart Descrip Special programmesConsumption Tion Degree of drying Timed DryingRated load Spin speed Drying time Mins 1600 Rated Water Energy Duration Consumption data for timed dryingLitres Minutes Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawer Drain filter Door sealWater inlet filter Emergency emptying out Frost precautions Problem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution Problem Noisy Feet have not been E10 Problem Possible cause If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundry This appliance complies with the following EC directives Technical data Service Safety instructions for the installer Instructions for installation and electrical connection Rear view Front view and side view Unpacking Installation Levelling PositioningWater inlet Electrical connection Water drainageConnect the machine to an earthed socket Permanent connection Made in ECC