How to wash
ing to amount, type, degree of soil of fabrics and water hardness.
This light could come on also when the drain filter is blocked.
If the RINSE HOLD 
option has been selected, the water must be emptied out before opening the door either
-by pressing the START/PAUSE button (the laundry will be spun at the speed corresponding to the selected type of fabrics. The spin speed can be reduced by means of the SPIN SPEED button)
-or by selecting the spin speed and then pressing START/PAUSE
-or by turning the selector dial to OFF and then to DRAIN 
and pressing the START/PAUSE button again. In this case the water will be emptied, but the laundry is not spun.
Turn the selector dial to OFF. Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleasant smells.
Automatic washing and drying
(NON-STOP programme)
Warning! For
Do not use dosing device/ball when carrying out a
Load the laundry.
Add detergent and additive. Select the wash programme.
Select eventually the required options by means of the relevant buttons. If possible, do not select a spin speed lower than that proposed by the appliance to avoid a too long drying time so saving energy.
By automatic washing and drying it is not possible to select a spin speed lower than 900 r.p.m. for cottons and 700 r.p.m. for synthetics (with timed drying).
Select the drying time or degree of drying.
Start the programme by depressing the START/PAUSE button. At the end of the programme, turn the selector dial to OFF. Remove the laundry.
29
