Description of the appliance

When the programme has finished, if the OVERDOSAGE light comes on, it indicates that too much detergent has been used or that the drain filter is blocked.

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the OFF position.

Warning! After a programme which ends with water in the drum

(RINSE HOLD option), turn the selector dial first to OFF and

then to the DRAIN programme .

Altering a programme which is running

To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button.

Any function can be modified before the machine starts it. After select-

ing the new option press the START/PAUSE button again to re-start the selected programme.

To modify the selected programme turn the programme selector dial to O and then choose a new programme.

The water is not emptied out and after pressing the START/PAUSE but- ton again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the START/PAUSE button.

The door can be opened if:

the machine is not already heating or drying;

the water level is not above the bottom edge of the door;

the drum is not turning.

The light on the control panel indicates if the door can be opened:

green light: the door can be opened;

unlit light: the door cannot be opened;

flashing red light: the door is open.

16

Page 16
Image 16
AEG 16810 Cancelling a programme, Altering a programme which is running, Opening the door after the programme has started