Installation, Unpacking | AEG 16810 instruction

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

025

Remove the poly- styrene block from the bottom of the machine and release the two plastic bags which are fixed under the filter door.

2 1

Carefully remove the

right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine.

Set the machine upright and remove the two remaining bolts from the back.

Pull out the three plastic spacers from the holes into which

the bolts were fit-

ted.

Plug the open holes with the plugs which you will find in the

plastic bag containing the instruction booklet.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

46

Image 46

AEG 16810 manual Installation, Unpacking

Contents

Lavamat Turbo Dear customer Contents Page Contents Technical data Service Positioning, connection, starting up Safety instructionsGeneral safety Follow the instructions for positioning and connection Child safety Proper use Packaging materials DisposalTips for environmental protection Machine Main features of your washer-dryer Description of the appliance Front view Control panel Programme selector dial Delay Start button START/PAUSE button Programme Option buttons Electronic Drying buttonDrying Time button Stain Soak Prewash Display Programme progress display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Detergent dispenser drawer Before the first wash Preparing the wash cycle Sorting out and preparing the laundry Cotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels Synthetics Delicates 40 Detergents and additives Garments not suitable for drying Preparing the drying cycleLoad Sort of laundry Modification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residue Additional drying How to dryDrying only Rated load Load the laundry How to washAdd detergent and additive Selection of the desired options Selection of the spin speed or Rinse Hold option Selection of the Extra Rinse option Before starting Starting the programme At the end of the programme Automatic washing and drying NON-STOP programme Programme chart Wash programmes Consumption Special programmesDescrip Tion Rated load Spin speed Drying time Mins Timed DryingDegree of drying 1600 Litres Consumption data for timed dryingRated Water Energy Duration Minutes After each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawer Drain filter Door sealWater inlet filter Frost precautions Emergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause Solution Noisy Feet have not been Problem Possible cause E10 Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundry Technical data This appliance complies with the following EC directives Service Instructions for installation and electrical connection Safety instructions for the installer Front view and side view Rear view Installation Unpacking Levelling PositioningWater inlet Electrical connection Water drainageConnect the machine to an earthed socket Permanent connection Made in ECC