Instructions for installation and electrical connection | AEG 16810

Instructions for installation and electrical connection

Safety instructions for the installer

•This appliance is heavy, care should be taken when moving it.

•When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

•All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the relevant paragraph.

•Any electrical work required to install this appliance must be carried out by a qualified electrician.

•Any plumbing work required to install this appliance must be carried out by a qualified plumber.

•After having installed the machine, check that it is not standing on its electrical supply cable.

•If the appliance is placed on a carpeted floor, ensure that air can cir- culate freely between the adjustable feet and the floor.

•The installation should comply with local water authority and build- ing regulations requirements.

•Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

44

Image 44

AEG 16810 manual Instructions for installation and electrical connection, Safety instructions for the installer

Contents

Lavamat Turbo Dear customer Contents Page Contents Technical data Service Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connection Child safety Proper use Disposal Tips for environmental protectionPackaging materials Machine Main features of your washer-dryer Description of the appliance Front view Control panel Programme selector dial Delay Start button START/PAUSE button Electronic Drying button Drying Time buttonProgramme Option buttons Stain Soak Prewash Display Programme progress display Opening the door after the programme has started Cancelling a programmeAltering a programme which is running Detergent dispenser drawer Before the first wash Preparing the wash cycle Sorting out and preparing the laundry Sort of laundry Approximate Dry weights Types of fabric and care labelsCotton Synthetics Delicates 40 Detergents and additives Preparing the drying cycle LoadGarments not suitable for drying Sort of laundry Drying symbols on garment labels Duration of the drying cycleModification of the drying time or degree of drying Fibre residue Drying only Rated load How to dryAdditional drying Add detergent and additive How to washLoad the laundry Selection of the desired options Selection of the spin speed or Rinse Hold option Selection of the Extra Rinse option Before starting Starting the programme At the end of the programme Automatic washing and drying NON-STOP programme Programme chart Wash programmes Special programmes DescripConsumption Tion Timed Drying Degree of dryingRated load Spin speed Drying time Mins 1600 Consumption data for timed drying Rated Water Energy DurationLitres Minutes Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawer Water inlet filter Door sealDrain filter Frost precautions Emergency emptying out Something not working? TroubleshootingProblem Possible cause Solution Problem Possible cause Solution Noisy Feet have not been Problem Possible cause E10 Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundry Technical data This appliance complies with the following EC directives Service Instructions for installation and electrical connection Safety instructions for the installer Front view and side view Rear view Installation Unpacking Water inlet PositioningLevelling Connect the machine to an earthed socket Water drainageElectrical connection Permanent connection Made in ECC