Starting the programme, At the end of the programme | AEG 16810

How to wash

Starting the programme

1.Check that the water tap is open.

2.Press START/PAUSE to start the programme. If the Delay Start option has been selected the programme will start at the end of the count- down.

If the door light is red and flashing at the start of the pro- gramme it indicates that the door is open. Close the door and press the START/PAUSE button again.

If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to modify or cancel the delay time.

•Load other laundry: press the START/PAUSE button. Open the door. Load the laundry. Close the door and press the START/PAUSE button again.

•Modify or cancel the delay time: press the START/PAUSE button.

Press the DELAY START button until the time required appears on the display, or 0h, if you wish to cancel it. Press the START/ PAUSE button again.

Programme progress display

By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.

PREWASH

MAIN WASH RINSES EXTRA RINSE + SPIN DRYING END

OVERDOSAGE

Display

The time to the end of the programme decreases minute	1 5 0
by minute and appears on the display.

At the end of the programme

The machine stops automatically. A zero appears on the display. An

acoustic signal is clearly audible. The END light comes on in the programme progress display.

If the light (OVERDOSAGE) comes on it indicates that too much detergent has been used. At the next wash carefully follow the detergent manufacturer’s instructions. Measure out detergent accord-

28

Image 28

AEG 16810 manual Starting the programme, At the end of the programme

Contents

Lavamat Turbo Dear customer Contents Page Contents Technical data Service Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connection Child safety Proper use Disposal Tips for environmental protectionPackaging materials Machine Main features of your washer-dryer Description of the appliance Front view Control panel Programme selector dial Delay Start button START/PAUSE button Electronic Drying button Drying Time buttonProgramme Option buttons Stain Soak Prewash Display Programme progress display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Detergent dispenser drawer Before the first wash Preparing the wash cycle Sorting out and preparing the laundry Sort of laundry Approximate Dry weights Types of fabric and care labelsCotton Synthetics Delicates 40 Detergents and additives Preparing the drying cycle LoadGarments not suitable for drying Sort of laundry Drying symbols on garment labels Duration of the drying cycleModification of the drying time or degree of drying Fibre residue Additional drying How to dryDrying only Rated load Load the laundry How to washAdd detergent and additive Selection of the desired options Selection of the spin speed or Rinse Hold option Selection of the Extra Rinse option Before starting Starting the programme At the end of the programme Automatic washing and drying NON-STOP programme Programme chart Wash programmes Special programmes DescripConsumption Tion Timed Drying Degree of dryingRated load Spin speed Drying time Mins 1600 Consumption data for timed drying Rated Water Energy DurationLitres Minutes Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawer Drain filter Door sealWater inlet filter Frost precautions Emergency emptying out Problem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause Solution Noisy Feet have not been Problem Possible cause E10 Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundry Technical data This appliance complies with the following EC directives Service Instructions for installation and electrical connection Safety instructions for the installer Front view and side view Rear view Installation Unpacking Levelling PositioningWater inlet Electrical connection Water drainageConnect the machine to an earthed socket Permanent connection Made in ECC