AEG 3210 BU Care And Cleaning, Cleaning Materials, Cleaning The Outside Of The Appliance

Models: 3210 BU

1 48
Download 48 pages 5.35 Kb
Page 25
Image 25
CARE AND CLEANING

CARE AND CLEANING

Before cleaning the appliance always allow the cooling fan for the controls to cool the appliance down before switching off the electricity supply.

CLEANING MATERIALS

Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives should also be avoided.

CLEANING THE OUTSIDE OF THE APPLIANCE

DO NOT use abrasive cleaning materials or scourers on the outside of the appliance as some of the finishes are painted and damage may occur. Regularly wipe over the control panel and oven doors using a soft cloth well wrung out in warm water to which a little liquid detergent has been added.

Any spillage on the stainless steel finish must be wiped off immediately.

Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish.

Do not place attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard.

CLEANING THE BRASS PLATED HANDLES (WHERE APPLICABLE)

If your appliance is fitted with brass plated handles it is strongly recommended that only hot soapy water is used for cleaning.

ANY OTHER CLEANING MATERIALS WILL DULL THE BRASS PLATED FINISH.

25

Page 25
Image 25
AEG 3210 BU installation instructions Care And Cleaning, Cleaning Materials, Cleaning The Outside Of The Appliance