CLEANING THE TOP OVEN ROOF
The grill element is hinged to make cleaning the oven roof easier.
Switch off the appliance from the electricity supply before cleaning and ensure the oven is cold.
1.Remove the wirework side runners. See below.
2.Undo the two screws which hold the grill element in place.
3.Gently pull the element downwards to allow access to the oven roof. Do not force the element downwards.
4.Clean the top of the oven with Cif cream cleaner and a sponge scourer. If heavily soiled, aerosol oven cleaners may be used following the instructions given above for cleaning the grill / top oven compartment.
5.Gently push the grill element back into place.
6.Fit the screws to hold the element in place and tighten firmly.
7.Replace the wirework side runners.
Ensure the screws are firmly in place after cleaning.
TO REMOVE THE WIREWORK RUNNERS
The wirework runners in both ovens can be removed for cleaning.
1.Remove all shelves and furniture from the oven.
2.Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven.
3.Support the side panel at the bottom.
4.Unhook the runner and side panel at the top and remove from the cavity.
5.To replace, ensure the side panel is assembled on to the wirework runner before hooking it back into the oven.
Ensure that the wirework runners are firmly in place before refitting the oven shelves.
SIDE PANEL
CAVITY CENTRE
28
