INSTALLATION INSTRUCTIONS
Check that the mounting brackets are level. They can be adjusted if necessary by using the extra holes at the ends of the brackets. Once the brackets are level, drill a pilot hole through the central hole in the bracket and fit the remaining screw.
HOW TO FINISH UNPACKING
Place appliance next to the space in which it will be installed. See Fig 8.
Remove the appliance packing except for bottom tray which should be left in position until the appliance is ready to be fitted into its cabinet.
Ensure the owner is given these operating instructions.
NOTE: It is imperative that the appliance is left in the base to protect both the appliance and the floor.
Important: Switch off at mains, miniature circuit breaker and, if appropriate, remove fuse before commencing any electrical work.
Fig. 8
40
