REPLACING AN OVEN LIGHT BULB
The type of bulb required is a 300°C, 25 watt small Edison Screw.
CAUTION: Disconnect the appliance from the electricity supply before replacing the bulb.
1.Make sure the appliance is cool before you replace a bulb
2.Open the door and remove the shelves, side panels and wirework runners.
Instructions on how to remove the wirework runners and side panels are given on page 28.
3.Pull the glass bulb cover towards you and then pull it off. If necessary use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.
4.Unscrew the bulb by turning it to the left.
5.Fit a new bulb and then replace the glass bulb cover.
6.Refit the side panels, wirework runners and replace the oven shelves.
7.Restore the appliance to the electricity supply and reset the time of day.
31
