AEG 50760 I manual Setting or changing the start delay, Cancelling the wash programme

Operating Instructions

0 1. Open the door of the dishwasher. The wash programme stops.

2.The indicator for the programme that is currently running extinguishes.

3.Close the door. The wash programme continues.

Cancelling the wash programme

0 1. Press the button for the current wash programme and hold it pressed. The programme indicator for the current wash programme flashes for a few seconds and then extinguishes.

2.Release the programme button, the wash programme is cancelled.

3	A selected programme is only interrupted by switching off the dish-
	washer, it is not cancelled. The wash programme is continued when the

dishwasher is switched on again.

Setting or changing the start delay

Using the start delay timer you can adjust when within the next 19 hours the programme is to begin.

Setting the start delay:

0 1. Press the ON/OFF button.

2.Continue pressing the DELAY TIMER button b until the number of hours until the start of the programme is flashing in the multi-display.

3.Press the button for the desired programme.

The length of the selected programme will flash for a moment in the multi-display, and then it will display the selected starting time again. As soon as the number of hours is displayed without flashing, the start delay has been activated.

The programme will start automatically following a countdown of the hours set.

Changing the start delay:

As long as the programme has not started, you can still change the start delay set by pressing the DELAY TIMER button until the desired start delay is shown in the multi-display.

Cancelling the start delay:

As long as the programme has not started you are still able to cancel the start delay. Continue pressing the DELAY TIMER button until the length of the selected programme appears in the multi-display. The selected programme will begin immediately.

27