AEG 50760 I manual Prior to using for the first time, Setting the water softener

Operating Instructions

Prior to using for the first time

Prior to using for the first time, remove all the clips with which the baskets are secured for transport.

Then perform the following steps: 0 1. Adjust the water softener

2.Fill with Salt for the Water Softener

3.Fill with Rinse Aid

Setting the water softener

To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime content. The dishwasher therefore has a built-in water softener, in which tap water with a hardness of 4°d (German degree) and harder is softened with the aid of special salt.

3	Your local water authority will be able to inform you about the hard-
	ness and hardness range of the water in your area.
	The water softener can be set manually using the water hardness
	switch; it can also be set electronically using the buttons on the control
	panel.
		Water hardness		Adjusting the hardness		Indication on
				setting
						the multi-dis-
	In °d 1	In mmol/l 2	Range	Manually	Electronically	play
	51 - 70	9,0 - 12,5			10 3	10L
	43 - 50	7,6 - 8,9		1	9	9L
	37 - 42	6,5 - 7,5	IV		8	8L
	29 - 36	5,1 - 6,4			7	7L
	23 - 28	4,0 - 5,0			6	6L
	19 - 22	3,3 - 3,9	III		5	5L
	15 - 18	2,6 - 3,2			4*	4L
	11 - 14	1,9 - 2,5	II	0*	3	3L
	4 - 10	0,7 - 1,8	I/II		2	2L
					1
	under 4	under 0,7	I		no salt	1L
					necessary

10