Pioneer XM2GO manual Settings, FM Modulator, FM Frequency, FM Mode

Settings

FM Modulator

Set the FM frequency that inno transmits on.

Turn the FM modulator on or off manually – or automatically when inserted into a home or car dock.

Adjust the volume level of the

FM transmission.

Settings

FM Frequency

Your inno contains a built-in FM modulator (or FM transmitter) that allows you to listen to whatever your inno is playing using an ordinary FM radio. All you have to do is set your inno and the FM radio to the same frequency.

1.Place inno in the home or car dock.

2.Find an unused FM frequency on your FM radio. Note that FM frequency.

3.Select XM ➝ Settings ➝ FM Modulator ➝ FM Frequency.

4.Use the up and down arrow buttons to choose the same FM frequency as in step 2. You should hear XM programming over your FM radio when your inno and radio frequencies match.

5.Press the XM button to confirm your selection.

FM Mode

Choose one of these settings:

AUTO	FM transmitter turns on when you place inno in the home or car docks. FM
	transmitter turns off automatically when you undock inno. inno always
	returns to AUTO when powered off.
ON	Turns on the FM transmitter. When you use your inno in handheld mode, you
	must manually turn on the FM transmitter and plug in the earbuds or travel
	power cable (which acts as an FM antenna).
OFF	Turns off the FM transmitter. Make sure you select this option when you’re
	on an airplane.

66 Settings Settings 67