Cisco Systems OL-15491-01 appendix Ip iSCSI, Ip csg iscsi drain delay, Ip csg iscsi drain packet

Appendix A CSG2 Command Reference

ip (iSCSI)

ip (iSCSI)

To specify the IP address of an iSCSI target in the target interface profile on the CSG2, use the ip command in iSCSI configuration mode. To remove the IP address configuration, use the no form of the command.

ip ip-address

no ip ip-address

Syntax Description ip-address IP address of the iSCSI target.

Command Default No default behavior or values.

Command Modes

Command History

iSCSI configuration

ReleaseModification

12.4(15)MD This command was introduced.

Usage Guidelines		Only one target can be defined per profile.
		The following example configures an iSCSI target interface profile with the name targetA to a SCSI
Examples
		target with the IP address 10.0.0.1.
		gprs iscsi targetA
		name iqn.2002-10.edu.abc.iol.iscsi.draft20-target:1
		ip 10.0.0.1
		port 3260
Related Commands		Command	Description
		ip csg iscsi drain delay	Defines the delay interval, in seconds, before draining
			packets from the Storage Area Network (SAN) connected to
			the Internet Small Computer Systems Interface (iSCSI)
			when the Billing Mediation Agent (BMA) becomes active.
		ip csg iscsi drain packet	Defines the number of packets to be drained from the
			Storage Area Network (SAN) connected to the Internet
			Small Computer Systems Interface (iSCSI) per drain delay
			interval when the Billing Mediation Agent (BMA) becomes
			active.
		ip csg iscsi profile	Specifies the Internet Small Computer Systems Interface
			(iSCSI) target to be used as backup storage for the CSG2.
		Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
	OL-15491-01			A-43