Cisco Systems OL-15491-01 appendix Ip csg database, No ip csg database, Server

Appendix A CSG2 Command Reference

ip csg database

ip csg database

To identify the database server that answers CSG2 user ID queries, use the ip csg database command in global configuration mode. To disable the database server, use the no form of this command.

ip csg database [vrf vrf-name]ip-address port-number local-port

	no ip csg database
Syntax Description	vrf vrf-name	(Optional) Specifies the Virtual Routing and Forwarding (VRF) table to be
		used for communication with the database server.
	ip-address	IP address of the database server that answers user ID queries.
	port-number	Port number of the database server that answers user ID queries. The range
		is from 1 to 65535.
	local-port	Local port number that the CSG2 is to use to send queries to the database
		server. The range is from 1 to 65535.
Defaults	If no VRF table is specified, the CSG2 uses the global routing table to communicate with the database
	server.
Command Modes	Global configuration

Command History

Usage Guidelines

Examples

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1:

•The name of this command changed from database to ip csg database.

•The configuration mode for this command changed from CSG user group to global configuration.

•The vrf vrf-nameand local-portkeywords and arguments were added.

You can configure one and only one database server to answer CSG2 user ID queries.

The subscriber traffic must flow on an interface in the global routing table (not the VRF table).

The following example shows how to specify a user database server with IP address 10.1.2.3, port number 11111, and local port number 22222:

ip csg database 10.1.2.3 11111 22222

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-62	OL-15491-01