Cisco Systems OL-15491-01 appendix Ip csg radius pod timeout, Default timeout is 5 seconds, 130

Appendix A CSG2 Command Reference

ip csg radius pod timeout

ip csg radius pod timeout

To specify the number of times to retry the RADIUS Packet of Disconnect (PoD) message if it is not acknowledged by means of an ACK message, and the interval between retransmissions, use the ip csg radius pod timeout command in global configuration mode. To restore the default timeout, use the no form of this command.

ip csg radius pod timeout timeout retransmit retransmit

no ip csg radius pod timeout timeout retransmit retransmit

Syntax Description	timeout	Number of seconds to wait for an ACK or NAK before sending another PoD
		message. The range is from 1 to 1000. The default timeout is 5 seconds.
	retransmit retransmit Number of times to retransmit the message. The range is from 1 to 100. The
		default setting is 3 retransmits.
Defaults	The default timeout is 5 seconds.
	The default number of retransmits is 3 retransmits.
Command Modes	Global configuration

Command History

Examples

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1:

•The name of this command changed from radius pod timeout to ip csg radius pod timeout.

•The configuration mode for this command changed from CSG user group configuration to global configuration.

The following example shows how to specify a RADIUS PoD timeout and the number of times to retransmit the message:

ip csg radius pod timeout 30 retransmit 5

Related Commands	Command	Description
	ip csg radius pod attribute	Specifies the RADIUS attributes to be copied from the RADIUS Start
		message and sent to the NAS in the PoD.
	ip csg radius pod nas	Specifies the NAS port to which the CSG2 is to send the PoD message,
		and specifies the key to use in calculating the Authenticator.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-130	OL-15491-01