Cisco Systems OL-15491-01 appendix Ip csg radius handoff, Radius handoff is disabled, 120

Appendix A CSG2 Command Reference

ip csg radius handoff

ip csg radius handoff

To configure the CSG2 RADIUS handoff timer, use the ip csg radius handoff command in global configuration mode. To turn off the timer, use the no form of this command.

ip csg radius handoff duration

no ip csg radius handoff

Syntax Description	duration	Handoff timer duration, in seconds.
		The handoff timer is started when a RADIUS Accounting Stop is received. If the
		handoff timer expires before a RADIUS Accounting Start for a subscriber is seen, the
		CSG2 assumes that a handoff did not occur and deletes the CSG2 User Table entry for
		the subscriber.
		The range is from 1 to 43200.
Defaults	RADIUS handoff is disabled.
Command Modes	Global configuration

Command History

Usage Guidelines

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1:

•The name of this command changed from radius handoff to ip csg radius handoff.

•The configuration mode for this command changed from CSG user group configuration to global configuration.

The handoff timer is started when a RADIUS Accounting Stop is received. If the handoff timer expires before a RADIUS Accounting Start is received for a subscriber, the CSG2 assumes a handoff did not occur and deletes the CSG2 User Table entry for the subscriber.

Examples	The following example shows how to specify a RADIUS handoff timer duration of 1000 seconds:
	ip csg radius handoff 1000

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-120	OL-15491-01