Cisco Systems OL-15491-01 appendix Replicate delay seconds no replicate delay, 223

Appendix A CSG2 Command Reference

replicate

replicate

To replicate the connection state for all connections to the CSG2 content servers on the standby system, use the replicate command in CSG2 content configuration mode. To disable connection redundancy, use the no form of this command.

replicate [delay seconds] no replicate [delay]

Syntax Description	delay seconds	(Optional) Number of seconds to delay state replication. The range is from
		1 to 3600. The default value is no delay.
Defaults	Connection redundancy is not enabled.
	If you do not specify a delay, there is no delay.
Command Modes	CSG2 content configuration

Command History

Usage Guidelines

Examples

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1:

•The name of this command changed from replicate connection tcp to replicate.

•The delay seconds keyword and argument were added.

Replication is not supported for the wireless application protocol 1.x (WAP 1.x) and Real Time Streaming Protocol (RTSP) protocols. Therefore, the CSG2 generates an error message if either of the following situations occurs:

•You have already configured RTSP or WAP 1.x using the parse protocol command and you try to enter the replicate command.

•You have already configured replicate and you try to configure RTSP or WAP 1.x using the parse protocol command.

For HTTP, the replicated session is treated as Layer 4. No HTTP parsing is performed when the replicated session on the standby CSG2 becomes active.

The following example shows how to enable replication for the CSG2 content MOVIES, and replication with a delay of 30 seconds for the CSG2 content GAMES:

ip csg content MOVIES

replicate

ip csg content GAMES

replicate delay 30

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-223