Cisco Systems OL-15491-01 Ip csg quota-server local-port, Quota-server local-port, 1024 to

Appendix A CSG2 Command Reference

ip csg quota-server local-port

ip csg quota-server local-port

To configure the local port on which the CSG2 communicates with quota servers, use the ip csg quota-serverlocal-portcommand in global configuration mode. To remove a quota server local port configuration, use the no form of this command.

ip csg quota-server local-port port-number

no ip csg quota-server local-port

Syntax Description

Defaults

Command Modes

port-number	Port number on which the CSG2 is to communicate with quota servers. The
	range is from 1024 to 65535. 5000 is not a valid port number.
	The quota server local port number must be different from the Billing
	Mediation Agent (BMA) local port number and from the Persistent Storage
	Device (PSD) local port number (configured with the ip csg bma local-port
	command and the ip csg psd local-portcommand, respectively).

No quota server local ports are configured.

Global configuration

Command History	Release	Modification
	12.4(11)MD	This command was migrated from CSG1.
		Changes from CSG1:
		• The name of this command changed from quota local-portto ip csg
		quota-server local-port.
		• The configuration mode for this command changed from CSG user group
		configuration to global configuration.
		• The range for the port-numberargument changed from 1 to 65535, to
		1024 to 65535.
Usage Guidelines	For prepaid billing, you must configure a quota server local port.

Note The CSG2 drops requests (such as nodealive, echo, and redirect requests) unless they come from a configured quota server IP address. The CSG2 also verifies IP addresses against the configured list of quota servers. If there is no match, the CSG2 drops the request. The CSG2 does not look at a request’s source port; the CSG2 replies to the port from which the request came.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-102	OL-15491-01