Cisco Systems OL-15491-01 appendix Ip csg redirect, 144

Appendix A CSG2 Command Reference

ip csg redirect

ip csg redirect

To redirect subscriber flows to an alternate IP address when the subscriber’s quota is exhausted, use the ip csg redirect command in global configuration mode. To remove the redirect, use the no form of this command.

ip csg redirect {http url interval seconds maximum number sip url wap url}

no ip csg redirect [http sip wap]

Syntax Description	http url		(Optional) Redirects HTTP subscriber flows to the specified redirect URL
			when quota is depleted, and configures the default URL for use in HTTP
			redirection.
	interval seconds		(Optional) Length of time, in seconds, during which the CSG2 redirects an
			out-of-quota subscriber. After this interval, the CSG2 drops the requests
			until quota can be requested again.
			The start of the interval is the time of the first redirect after a quota grant of
			zero. The range is from 0 to 3600. The default is 8.
	maximum number		(Optional) Maximum number of times a redirect is to be performed for an
			out-of-quota subscriber during a redirect interval. The range is from
			0 to 255. The default is 15.
	sip url		(Optional) Redirects Session Initiation Protocol (SIP) call requests
			(INVITE methods) to the specified redirect URL when quota is depleted.
	wap url		(Optional) Redirects wireless application protocol (WAP) subscriber flows
			to the specified redirect URL when quota is depleted.
Defaults	If you do not specify an interval, the CSG2 redirects subscriber flows after 8 seconds.
	If you do not specify a maximum, the CSG2 allows up to 15 redirects during the interval.
Command Modes	Global configuration
Command History	Release	Modification
	12.4(11)MD	This command was migrated from CSG1.
		Changes from CSG1:

•The name of this command changed from redirect to ip csg redirect.

•The configuration mode for this command changed from CSG user group configuration to CSG2 service configuration.

•The interval seconds and maximum number keywords and arguments were added.

•The nat ip-addressand port-numberkeyword and arguments were removed.

12.4(15)MD The sip keyword and url argument were added.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-144	OL-15491-01