Cisco Systems OL-15491-01 appendix Flags, Tcp, Wap, Mask, Value

Appendix A CSG2 Command Reference

flags

flags

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

To specify IP, TCP, or wireless application protocol (WAP) flag bit masks and values for CSG2 Prepaid Error Reimbursement, use the flags command in CSG2 refund configuration mode. To remove the flags, use the no form of this command.

flags {ip mask tcp mask wap} value

no flags {ip mask tcp mask wap} value

ip	All IP protocol connections other than TCP or WAP.
tcp	TCP connections
wap	WAP connections.
mask	The mask for an ip or tcp flag must match that reported to the Billing
	Mediation Agent (BMA) for connection termination. The range for
	mask is from 0x01 to 0xFF.
value	The value for an ip, tcp, or wap flag, which must match that reported
	to the BMA for connection termination.
	• For an ip or tcp flag, the range for value is from 0x00 to 0xFF.
	• For a wap flag, value can be 0x00, 0x01, 0x02, or 0x04.
None
CSG2 refund configuration

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1: None.

The CSG2 supports flag-based refunding for all protocols.

The ip flag values are:

•0x01: Connection initiator.

–0: The connection was initiated by the subscriber. The source address is associated with the user ID.

–1: The connection was initiated by the network. The destination address is associated with the user ID.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-33