Cisco Systems OL-15491-01 appendix Parse length number no parse length, 204

Appendix A CSG2 Command Reference

parse length

parse length

To define the maximum number of Layer 7 bytes that the CSG2 is to parse when attempting to assign a policy, use the parse length command in CSG2 content configuration mode. To restore the default setting, use the no form of this command.

parse length number no parse length

Syntax Description	number	Maximum number of Layer 7 bytes to parse. The range is from 1 to 65535.
		The default value is 4000.
Defaults	The CSG2 parses up to 4000 Layer 7 bytes when attempting to assign a policy.
Command Modes	CSG2 content configuration
Command History	Release	Modification
	12.4(11)MD	This command was introduced.
	If the parse length is exceeded, the CSG2 blocks or forwards packets on the basis of the block command.
Usage Guidelines
	This command is valid only if parse protocol http is also configured.
Examples	The following example specifies that the CSG2 is to parse up to 1234 Layer 7 bytes when attempting to
	assign a policy:
	ip csg content MOVIES
	parse protocol http
	parse length 1234
Related Commands	Command	Description
	block	Forces the CSG2 to drop packets that do not match a configured billing
		policy.
	ip csg content	Configures content for CSG2 services, and enters CSG2 content
		configuration mode.
	parse protocol	Defines how the CSG2 is to parse traffic for a content.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-204	OL-15491-01