Cisco Systems OL-15491-01 appendix Meter initial value no meter initial value, 193

Appendix A CSG2 Command Reference

meter initial

meter initial

To specify the initial quota debited by the CSG2 from the balance at the beginning of a service when the service is configured for Service Duration Billing, use the meter initial command in CSG2 service configuration mode. To restore the default behavior, use the no form of the command.

meter initial value no meter initial value

Syntax Description	value	Initial quota, in quadrans, debited from the balance at the beginning
		of a service when the service is configured for Service Duration
		Billing. The debit occurs when the CSG2 grants the first network
		access for a session that has been mapped to the service. The initial
		value is not rounded up to the nearest increment value.
		The range is from 0 to 65535. The default value is 0.

Defaults

Command Modes

Command History

Usage Guidelines

Examples

The default quota is 0 quadrans.

CSG2 service configuration

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1: None.

This command allows “connection setup charges” to be applied to a service.

The debit occurs when the CSG2 grants the first access for the service. The initial value is not rounded up to the nearest increment value.

The following example shows how to configure an initial quota debit for the OFF_NET service.

ip csg service OFF_NET

meter initial 60

Related Commands	Command	Description
	ip csg service	Configures a CSG2 content billing service, and enters CSG2
		service configuration mode.
	meter exclude control sip	Excludes call control packets for a Session Initiation Protocol
		(SIP) session from the CSG2 usage calculation.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-193