Cisco Systems OL-15491-01 appendix Name iSCSI, Name target-name No name target-name, 199

Appendix A CSG2 Command Reference

name (iSCSI)

name (iSCSI)

To specify the name of an iSCSI target in the target profile on the CSG2, use the name command in iSCSI configuration mode. To remove the IP address configuration, use the no form of the command.

name target-name

no name target-name

Syntax Description target-name Name of the iSCSI target.

Command Default No default behavior or values.

Command Modes

Command History

iSCSI configuration

ReleaseModification

12.4(15)MD This command was introduced.

Examples	The following example configures an iSCSI target interface profile with the name targetA to a SCSI
	target named eftcompany.com.
	ip iscsi target-profile targetA
	name iqn.2002-10.edu.abc.iol.iscsi.draft20-target:1
	ip 10.0.0.1
	port 3260
Related Commands	Command	Description
	ip (iSCSI)	Specifies the IP address of an iSCSI target in the target
		interface profile on the CSG2.
	ip csg iscsi drain delay	Defines the delay interval, in seconds, before draining
		packets from the Storage Area Network (SAN) connected to
		the Internet Small Computer Systems Interface (iSCSI)
		when the Billing Mediation Agent (BMA) becomes active.
	ip csg iscsi drain packet	Defines the number of packets to be drained from the
		Storage Area Network (SAN) connected to the Internet
		Small Computer Systems Interface (iSCSI) per drain delay
		interval when the Billing Mediation Agent (BMA) becomes
		active.
	ip csg iscsi profile	Specifies the Internet Small Computer Systems Interface
		(iSCSI) target to be used as backup storage for the CSG2.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-199