Cisco Systems OL-15491-01 Ip csg psd drain delay number-of-seconds, No ip csg psd drain delay

Appendix A CSG2 Command Reference

ip csg psd drain delay

ip csg psd drain delay

To define the delay interval, in seconds, before draining packets from the Cisco Persistent Storage Device (PSD) when the Billing Mediation Agent (BMA) becomes active, use the ip csg psd drain delay command in global configuration mode. To delete the drain delay interval, use the no form of this command.

ip csg psd drain delay number-of-seconds

	no ip csg psd drain delay
Syntax Description	number-of-seconds		Delay interval, in seconds, before draining packets from the PSD. The range
			is 0 to 3. The default value is 1. A value of 0 means no delay.
Defaults	The default value is 1 second.
Command Modes	Global configuration
Command History	Release	Modification
	12.4(11)MD	This command was introduced.
Usage Guidelines	The CSG2 can buffer GTP’ messages in the Cisco Persistent Storage Device (PSD), if so configured.
	(For more information, see the “Configuring PSD Support” section on page 7-1.) By default, the CSG2
	limits the rate at which GTP’ messages are read from the PSD to 500 packets/second. However, you can
	use the ip csg psd drain delay command to change that rate. For example, specifying an interval of
	2 seconds yields a rate of 250 packets/second (500 packets/2 seconds).
Examples	The following example shows how to specify a PSD drain delay interval of 2 seconds:
	ip csg psd drain delay 2
Related Commands	Command		Description
	ip csg psd		Configures a Cisco Persistent Storage Device (PSD).
	ip csg psd drain packet		Defines the number of packets to be drained from the Cisco
			Persistent Storage Device (PSD) per drain delay interval when the
			Billing Mediation Agent (BMA) becomes active.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-88	OL-15491-01