Appendix A CSG2 Command Reference

ip csg bma

ip csg bma

To configure the Billing Mediation Agents (BMAs) to which the CSG2 is to send billing records, use the ip csg bma command in CSG2 global configuration mode. To remove a BMA from the list of agents, use the no form of this command.

ip csg bma [vrf vrf-name]ip-address port-number priority

no ip csg bma [vrf vrf-name]ip-address port-number

Syntax Description

Defaults

Command Modes

Command History

vrf vrf-name

(Optional) Virtual Routing and Forwarding (VRF) table which the CSG2 is

 

to use to communicate with the BMA.

 

 

ip-address

IP address of the BMA you wish to define.

 

The CSG2 differentiates BMAs on the basis of their IP addresses. When you

 

configure a BMA, make sure its IP address matches on both the active CSG2

 

and on the standby CSG2.

 

 

port-number

Port number of the BMA you wish to define. The range is from 1 to 65535.

 

The CSG2 differentiates BMAs on the basis of their port numbers. When

 

you configure a BMA, make sure its port number matches on both the active

 

CSG2 and the standby CSG2.

 

 

priority

Priority of the BMA you wish to define.

 

The priority specifies the order of preference of the agents. A lower number

 

indicates a higher priority. If the current agent becomes unusable, the CSG2

 

uses the highest priority BMA available.

 

Priorities for different agents do not have to be sequential. That is, you can

 

have three agents with priorities 1, 5, and 10.

 

The range of priorities is 1 to 1000.

 

 

Active and standby BMAs are not defined.

If no VRF table is specified, the CSG2 uses the global routing table to communicate with the BMA.

Global configuration

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1:

The name of this command changed from agent (CSG2 accounting) to ip csg bma.

The vrf vrf-namekeyword and argument were added.

 

Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide

A-46

OL-15491-01

Page 46
Image 46
Cisco Systems OL-15491-01 appendix Ip csg bma, Syntax Description Defaults Command Modes Command History