Cisco Systems OL-15491-01 appendix Entries user idle duration pod no entries user idle, Pod

Appendix A CSG2 Command Reference

entries user idle

entries user idle

To set the time after which entries for idle subscribers are deleted from the CSG2 User Table, use the entries user idle command in CSG2 billing configuration mode. To use the default settings, use the no form of this command.

entries user idle duration [pod] no entries user idle

Syntax Description	idle duration	Number of seconds after which entries for idle subscribers are deleted from the
		CSG2 User Table. The range is from 0 (entries never idle out) to 2147483647.
		The default setting is 0 (entries never idle out).
	pod	(Optional) Specifies whether the CSG2 is to send the RADIUS Packet of
		Disconnect message when an entry idles out.
Defaults	The default idle duration is 0 seconds, and the CSG2 does not send the RADIUS Packet of Disconnect
	message when an entry idles out.
Command Modes	CSG2 billing configuration
Command History	Release	Modification
	12.4(11)MD	This command was migrated from CSG1.
		Changes from CSG1: The name of this command changed from entries idle (CSG2
		billing) to entries user idle.

Usage Guidelines The CSG2 User Table identifies all subscribers known to the CSG2. The table is populated on the basis of the contents of RADIUS Accounting Start messages, or from the user database, if either feature is enabled in your configuration.

When setting the entry idle timer, keep the following considerations in mind:

•You can set the entry idle timer either globally, using the ip csg entries user idle command in global configuration mode, or in each billing plan, using the entries user idle command. If you do not set the timer in the billing plan, the CSG2 uses the global timer. That is, if there is an entry idle timer value in the billing plan, it is used; otherwise, if there is a global entry idle timer value configured, it is used.

•If set, the idle timer starts when there are no billable sessions, and restarts whenever a RADIUS Accounting Start or an Interim Accounting message is received. The timer stops when a billable session is started.

•If you do not specify the pod keyword, the CSG2 deletes the idle entry when the timer expires.

•If you specify the pod keyword, and if RADIUS Packet of Disconnect (PoD) is configured for the CSG2, the CSG2 sends a PoD message when the idle timer expires. The CSG2 deletes the idle entry when the PoD message is ACKed, NAKed, or when all retries have been sent.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-31