Cisco Systems OL-15491-01 Ip csg bma activate, Ip csg bma keepalive, Ip csg bma local-port

Appendix A CSG2 Command Reference

ip csg bma

Usage Guidelines

Note

Examples

You must specify the BMA local port using the ip csg bma local-portcommand before you enter the ip csg bma command.

Accounting records are sent only to the agents identified in the ip csg bma command. This provides a measure of security to ensure that records are not sent to unauthorized systems.

General packet radio service (GPRS) tunneling protocol (GTP) prime (GTP’) does not support nodealive or redirect for multiple agents with the same IP address.

The CSG2 does not support multiple BMAs with the same IP address.

The following example shows how to configure a BMA with priority 10 that uses VRF table BMAVRF:

ip csg bma vrf BMAVRF 1.2.3.4 5555 10

Related Commands	Command	Description
	ip csg bma activate	Enables support for multiple active BMAs.
	ip csg bma keepalive	Defines the Billing Mediation Agent (BMA) keepalive time interval for the
		CSG2.
	ip csg bma local-port	Defines the port on which the CSG2 listens for packets from the BMAs.
	ip csg bma messages	Specifies the maximum number of general packet radio service (GPRS)
		tunneling protocol prime (GTP’) messages that the CSG2 can buffer for all
		Billing Mediation Agents (BMAs).
	ip csg bma retransmit	Defines the Billing Mediation Agent (BMA) retransmit time interval for the
		CSG2.
	ip csg bma retries	Defines the maximum number of Billing Mediation Agent (BMA) retries
		allowed before the CSG2 determines that the link has failed.
	ip csg bma window	Defines the Billing Mediation Agent (BMA) transmit window size for the
		CSG2.

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-47