Cisco Systems OL-15491-01 appendix Idle CSG2 service, Ip csg service Movies Idle

Appendix A CSG2 Command Reference

idle (CSG2 service)

idle (CSG2 service)

To specify the minimum amount of time that the CSG2 maintains a service with no subscriber sessions, use the idle command in CSG2 service configuration mode. To restore the default idle duration value, use the no form of this command.

idle duration no idle duration

Syntax Description	duration	Service idle timer duration, in seconds. The timer begins when there are no sessions.
		If a subscriber’s quota for a service is unused for more than duration seconds, the
		CSG2 assumes that the service is idle and sends a Service Stop to free up the resources.
		The range is from 10 to 65535. The default is 300.
Defaults	The default idle duration is 300 seconds (5 minutes).
Command Modes	CSG2 service configuration
Command History	Release	Modification
	12.4(11)MD	This command was migrated from CSG1.
		Changes from CSG1: None.

Usage Guidelines For services configured with basis second, make sure the idle timeout value for the content configurations, set using the idle command in CSG2 content configuration mode, does not exceed the service idle timeout value, set using the idle command in CSG2 service configuration mode. Examples of these contents include:

•Non-TCP contents

•TCP contents with policies for HTTP or WAP 2.0 where the subscriber or network does not close the TCP connection at the end of the transaction

If a subscriber's quota for a service is unused for more than the service idle timer duration, the CSG2 assumes that the service is idle and sends a ServiceStop to free up quota.

For RTSP, do not set the idle timer duration to less than 60 seconds.

Examples The following example shows how to configure a 120-second idle timer for the CSG2 service MOVIES:

ip csg service MOVIES

idle 120

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-38	OL-15491-01