Cisco Systems OL-15491-01 appendix Meter include imap, Body header, Body only, Body other, 188

Appendix A CSG2 Command Reference

meter include imap

meter include imap

To specify which Internet Message Access Protocol (IMAP) bytes are billed for by the CSG2 when doing prepaid debits, use the meter include imap command in CSG2 service configuration mode. To return to the default behavior, use the no form of the command.

meter include imap body {header only other} no meter include imap

Syntax Description	body header	Only BODY and HEADER IMAP bytes are to be counted when
		performing prepaid debits.
	body only	Only BODY IMAP bytes are to be counted when performing prepaid
		debits.
	body other	Only BODY and OTHER IMAP bytes are to be counted when
		performing prepaid debits.
Defaults	All IMAP bytes are to be counted when performing prepaid debits.
Command Modes	CSG2 service configuration
Command History	Release	Modification
	12.4(11)MD	This command was migrated from CSG1.

Changes from CSG1:

• The name of this command changed from meter imap to meter include imap.

• The body-header,body-only, and body-other keywords changed to body header, body only, and body other, respectively.

Usage Guidelines You can configure only one meter include imap command per service. The billing basis for the service must be byte. The three categories of bytes are BODY, HEADER, and OTHER, determined as follows:

•BODY—The bytes are classified as BODY if a fetch request or response is encountered for one of the following specifications (including any appended “<>” subset variants):

–BODY[]

–BODY[#]

–BODY[TEXT]

–BODY[#.TEXT]

–BODY.PEEK[]

–BODY.PEEK[#]

–BODY.PEEK[TEXT]

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
A-188	OL-15491-01