Cisco Systems OL-15491-01 appendix Port iSCSI, Port port-number no port port-number, 211

Appendix A CSG2 Command Reference

port (iSCSI)

port (iSCSI)

To specify the number of the port on which to listen for iSCSI traffic in the iSCSI target interface profile on the CSG2, use the port command in iSCSI configuration mode. To remove the port number, use the no form of the command.

port port-number no port port-number

Syntax Description	port-number	Number of the port on which to listen for iSCSI traffic. We recommend that
		you use port 3260.
Command Default	No default behavior or values.

Command Modes

Command History

iSCSI configuration

ReleaseModification

12.4(15)MD This command was introduced.

Examples		The following example configures an iSCSI target interface profile with the name targetA to a iSCSI
		target with which the CSG2 will communicate using port number 3260.
		ip iscsi target-profile targetA
		name iqn.2002-10.edu.abc.iol.iscsi.draft20-target:1
		ip 10.0.0.1
		port 3260
Related Commands		Command	Description
		ip (iSCSI)	Specifies the IP address of an iSCSI target in the target
			interface profile on the CSG2.
		ip csg iscsi drain delay	Defines the delay interval, in seconds, before draining
			packets from the Storage Area Network (SAN) connected to
			the Internet Small Computer Systems Interface (iSCSI)
			when the Billing Mediation Agent (BMA) becomes active.
		ip csg iscsi drain packet	Defines the number of packets to be drained from the
			Storage Area Network (SAN) connected to the Internet
			Small Computer Systems Interface (iSCSI) per drain delay
			interval when the Billing Mediation Agent (BMA) becomes
			active.
		ip csg iscsi profile	Specifies the Internet Small Computer Systems Interface
			(iSCSI) target to be used as backup storage for the CSG2.
		Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
	OL-15491-01			A-211