Cisco Systems OL-15491-01 appendix Ip csg radius userid, User-Name, Calling-Station-Id, 141

Appendix A CSG2 Command Reference

ip csg radius userid

ip csg radius userid

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

To specify the RADIUS attribute used to extract the user identifier from a RADIUS record, use the ip csg radius userid command in global configuration mode. To specify that no RADIUS attributes are to be used, use the no form of this command.

ip csg radius userid {1 31 User-Name Calling-Station-Id}

no ip csg radius userid

1	RADIUS attribute number 1.
31	RADIUS attribute number 31.
User-Name	Equivalent to RADIUS attribute number 1.
Calling-Station-Id	Equivalent to RADIUS attribute number 31.
None
Global configuration

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1:

•The name of this command changed from radius userid to ip csg radius userid.

•The configuration mode for this command changed from module CSG configuration to global configuration.

The ip csg radius userid command specifies that the CSG2 obtains the user ID from either attribute

1or 31. If the no form of this command, no ip csg radius userid, is used, user IDs are not obtained from RADIUS messages.

Examples	The following example shows how to specify RADIUS attribute User-Name:
	ip csg radius userid User-Name

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-141