Cisco Systems OL-15491-01 appendix Meter exclude svc-idle, Offnet service, 186

Appendix A CSG2 Command Reference

meter exclude svc-idle

meter exclude svc-idle

Syntax Description

Defaults

Command Modes

To exclude the final service idle from the CSG2 usage calculation, use the meter exclude svc-idlecommand in CSG2 service configuration mode. To return to the default behavior, use the no form of the command.

meter exclude svc-idle

no meter exclude svc-idle

This command has no arguments or keywords.

The default behavior is to include the service-idle in the usage calculation.

CSG2 service configuration

Command History			Release	Modification
			12.4(11)MD	This command was migrated from CSG1.
				Changes from CSG1: The meter exclude command split into three new
				commands—meter exclude mms wap, meter exclude pause rtsp, and meter
				exclude svc-idle.
Usage Guidelines			Configuration of this command can result in reduced charging because the next service access occurs
			after the service idles, rather than occurring before the service idles.
			You cannot configure both meter exclude svc-idleand basis byte or basis fixed in the same service.
			Only basis second is meaningful with meter exclude svc-idle.
Examples			The following example shows how to exclude the final service idle from the usage calculation for the
			OFF_NET service:
			ip csg service OFF_NET
			meter exclude svc-idle
Related Commands			Command		Description
			ip csg service		Configures a CSG2 content billing service, and enters CSG2
					service configuration mode.
			meter exclude control sip		Excludes call control packets for a Session Initiation Protocol (SIP)
					session from the CSG2 usage calculation.
			meter exclude mms wap		Excludes bytes for a WAP 1.x Multimedia Messaging Service
					(MMS) session from the CSG2 usage calculation.
		Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
	A-186				OL-15491-01