Cisco Systems OL-15491-01 Ip csg records format, Variable, Combined http, Combined wap, 143

Appendix A CSG2 Command Reference

ip csg records format

ip csg records format

To specify variable, fixed, or combined (variable-single) call detail record (CDR) format, use the ip csg records format command in global configuration mode. To use the default setting, use the no form of this command.

ip csg records format [fixed variable [combined {http wap}]]

no ip csg records format [fixed variable [combined {http wap}]]

Syntax Description	fixed	(Optional) Specifies fixed CDR format.
	variable	(Optional) Specifies variable CDR format.
	combined http	(Optional) Specifies combined (variable-single) CDR format for HTTP traffic.
	combined wap	(Optional) Specifies combined (variable-single) CDR format for wireless
		application protocol (WAP) traffic.
	The default setting is variable.
Defaults
Command Modes	Global configuration

Command History

Usage Guidelines

Release Modification

12.4(11)MD This command was migrated from CSG1.

Changes from CSG1:

•The name of this command changed from records format to ip csg records format.

•The configuration mode for this command changed from CSG accounting configuration to global configuration.

•The variable-single-cdrkeyword was replaced with the combined keyword.

•The http and wap keywords were added.

This command is valid only for transaction-based CDRs. It is not valid for service-level CDRs.

Fixed record format generates CDRs that always contain the same set of Tag-Length-Values (TLVs). Some might have a length of zero. This format is primarily used for integration with legacy billing systems.

Examples	The following example shows how to specify combined CDR record format for HTTP traffic:
	ip csg records format variable combined http

	Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01		A-143